TWEHA PreFix X-tra is suitable for the pre-treatment of fiber cement bonded materials and stone-like materials with a porous surface.
The degree of density of a solid (the substrates to be bonded) allows water to penetrate between the solids of the material. In a porous material, as the word says, the water easily can find a way in the pores of the material.
Each material increases moisture to a greater or lesser extent. Tension due to its own weight and wind load is partly absorbed by the grain tension in the material of the panel. The remainder of this tension is absorbed by the water tension.

Normally this causes a slight change in shape, but in porous material it reacts different. Then the grains will slide over and even roll. This process gives water the opportunity to fill the available spaces. This process continues to repeat which ultimately will result in the development of a water film between the adhesive mass and the porous material until the adhesion of the glue joint collapses.
The surface enhancer TWEHA Prefix X-tra closes the pores on the surface of the substrate, distributes the tension over a larger surface, thus eliminating the above-described phenomenon, thus preventing the detachment of the bonding due to this described process.