Tweha Tools | Tweha

Home > Tweha Materials > Tweha PanelMate

Tweha Tools

Roof Trim Clip

One of the most common mistakes in the application process of ventilated facades is the lack of adequate ventilation. How often does it happen that the roofing contractor, long after the cladding application has been completed, places the roof trim too tight against the facade panel so the ventilation is blocked? Research shows that this happens far too often!

Therefore TWEHA provides this roof trim clip for free. By using this roof trim clip, you always ensure that a correct ventilation opening is created. This roof trim clip is suitable for 6 and 8 mm plates and must be applied c.t.c. 600 mm.

Sealant guns

In order to apply all our adhesives correctly, TWEHA offers a wide range of sealant guns. They give a continuous variable injection pressure which ensures an even spread of the adhesive. All of our sealant guns stop immediately when the lever is pressed.

Upon request we can also provide you with electric or pneumatic sealant guns!

Cutting wire set

You can disassemble a façade panel by cutting the bonding beads behind the facade panel using a cutting wire set. The wire set consists of a braided wire and two very solid pull handles, which both have a safety pin, so that in case of a wire break a safe distance between the hand and the wire is obtained. Always wear safety gloves to protect your hands, even when mounting the cutting wire!

To disassemble the facade panel you have to place the cutting wire behind the panel above into the horizontal joint and then cut with long movements, cutting through the bonding beads at the back of the existing facade panel’s.

Caution! Make sure you have a provision to handle, or to fix, the facade panel at the moment that the glue strips are cut through. Use for each façade panel a new cutting thread: the cutting heat makes the wire brittle.

Humidity meter

By continuously measuring and monitoring the outdoor climate, the by TWEHA introduced humidity meter supports the warranty administration. The external temperature sensor communicates 24/7 with the data logger for the registration, storage and display of temperature, relative humidity and dew point. With the supplied software, the measurement moments are read into your PC or laptop and added to the warranty documents as an Excel file.

Packaging:

Download order form

Instructions For Use (IFU)

MSDS

Technical Datasheet

Chemical Declaration Sheet

Tested and approved substrates

Declaration Of Performance (DOP)

OUR PROJECTS

Discover our inspiring projects worldwide and be inspired by the versatile applications of our bonded cladding.

See all projects

TWEHA CALCULATOR

“Easily calculate the materials needed for your project with our handy Quantity or dewpoint Calculator.”

Use the calculator

TWEHA CALCULATOR

“Easily calculate the materials needed for your project with our handy Quantity or dewpoint Calculator.”

Use the calculator

TWEHA REVIEWS

Check out the most useful reviews written by our relations who are familiar with our expertise, technical support and TWEHA’s adhesive systems.

★★★★★

Due to the prevalent atmospheric conditions, in our country there were severe limitations to the installation of ventilated façade claddings during 6-8 months per year. With TWEHA’s primerless bonding system it is now possible to proceed with the installation all year round, thus offering a great benefit to our professional customers.
Beside the advantages of a primerless bonding system explained in the answer above, it was of great value to us to be able to count with the expertise and technical support of TWEHA which has enabled us to satisfy all the queries received from our professional customers.

I will certainly recommend TWEHA.

MASSIMO NAVA

Vivarec, Estonia, January 2021

★★★★★

In 2019 we were looking at adding a new phenolic resin door style (HPL) to our cabinet line. The phenolic doors and panels are very heavy and our regular Polyurethane adhesives wouldn’t adhere to the surface of the material. TWEHA PanelMate was recommended by our paneling supplier and we are grateful for the recommendation!
We place a lot of faith in the adhesion properties of TWEHA PanelMate. Our panels are 12mm thick and there isn’t a lot of material for mechanical fasteners to attach to. We have to rely mostly on the adhesion of the TWEHA PanelMate in our factory and in our dealer’s installations. We find the drying time and adhesion work perfectly for our application.

TWEHA PanelMate’s testing document gave us great confidence. Great adhesion and durability outdoors. We have sold out a number of jobs in the past two years and have had no returns due to adhesion issues. We have also added TWEHA PanelMate as our adhesive of choice on our online ordering system and almost all of our dealers that order our phenolic door cabinetry order TWEHA PanelMate to use for their installations.

TERRY BAKER

Naturekast, Canada, January 2021

★★★★★

I had the opportunity to cooperate with Tweha company on a couple of projects, all praise, and recommendations. Very high-quality cooperation, and very high-quality products, helped in our work when it was most needed. Note – the products can be applied in conditions below 5 degrees, very important in our business, when it comes to sudden cold weather.

ZORAN NIKOLIC

Testeral, Serbia, November 2023

★★★★★

I have been working with Mario from TWEHA for about seven years now. Mario is trustworthy and always keeps his promises. Best recommendations from me.

PER DYBDAL

Dybal Contracting, Denmark, September 2021

★★★★★

We’ve had no call-backs about installations anywhere.
That’s always good news in our book.

ALEX SCHAUB

Ecosupply, USA, January 2021