TWEHA Cleaner+

Universal cleaner and degreaser for professional bonding applications

TWEHA Cleaner+ is a transparent, neutral universal cleaner and degreaser, specially selected for the preparation of surfaces before bonding, sealing or finishing.
Clean, dry and grease-free surfaces are essential for reliable adhesive bonding. TWEHA Cleaner+ efficiently removes grease, dirt and uncured adhesive residues and evaporates completely without leaving an oily film. It is therefore an essential component in the preparation of substrates used within TWEHA Bonding Systems.

TWEHA Cleaner+ can be used on a wide range of materials, including aluminum, wood, synthetic fibre and cement-based substrates. Unlike aggressive degreasers, it has no appreciable effect on the surface of façade panels when used in accordance with the TWEHA application instructions.

For adhesive bonding applications, the surface must be dry, clean and free from dust and grease. Apply TWEHA Cleaner+ to the bonding surface and wipe in one direction using a clean, lint-free cloth or paper tissue. Allow TWEHA Cleaner+ to evaporate completely for approximately 10 minutes before continuing with the next application step. The cleaned surface must be protected against renewed contamination.

Because substrates and surface finishes can vary, suitability should always be verified against the applicable TWEHA Technical Data Sheet, Instructions for Use and the current list of tested and approved substrates.

Last ned teknisk datablad

Kontakt

Aerosol

500 ml

(approx. 20 m²)

Can

5 ltr

(approx. 200 m²)

Color

Transparant

Utviklet for ytelse og effektivitet

Ingen mekanisk festing nødvendig

Dette gjør skruer og nagler overflødige, slik at panelene kan beholde et rent og sømløst arkitektonisk utseende.

Frihet i designet

Panelene kan utformes tynnere og lettere, uten at det er nødvendig å ta hensyn til mekaniske forankringssystemer.

Høy ytelse

Gir utmerket vedheft, strekkfasthet og skjærfasthet, noe som sikrer langsiktig strukturell pålitelighet.

Påføring uten grunning

Det er ikke behov for aggressive limgrunnere på de fleste underlag, noe som reduserer installasjonstiden og kostnadene.

Ingen mekanisk festing nødvendig

Dette gjør skruer og nagler overflødige, slik at panelene kan beholde et rent og sømløst arkitektonisk utseende.

Frihet i designet

Panelene kan utformes tynnere og lettere, uten at det er nødvendig å ta hensyn til mekaniske forankringssystemer.

Høy ytelse

Gir utmerket vedheft, strekkfasthet og skjærfasthet, noe som sikrer langsiktig strukturell pålitelighet.

Påføring uten grunning

Det er ikke behov for aggressive limgrunnere på de fleste underlag, noe som reduserer installasjonstiden og kostnadene.

Utviklet for pålitelig liming

TWEHA Cleaner+ combines effective cleaning with fast and convenient application:

01

Universal Transparent Cleaner

A neutral cleaner and degreaser for a wide range of façade and construction materials.

02

Fast and Effective Cleaning

Removes grease, contamination and uncured adhesive residues quickly and effectively.

03

Suitable for Façade Materials

Provides non-aggressive cleaning for façade panels, aluminium and other light metals.

04

Clean and Easy Application

Easy to apply, evaporates quickly and completely, and leaves no oily residue.

05

Complete Surface Preparation

Suitable for preparing substrates and supporting structures within TWEHA Bonding Systems.

TWEHA Cleaner+ is particularly suitable for:

Particularly suitable for cleaning and degreasing surfaces before adhesive bonding, including the preparation of façade panels before applying TWEHA adhesives, aluminum supporting profiles, ferrous and non-ferrous metals, and fiber cement and other approved façade materials. It is equally suited to preparation before applying TWEHA PreFix X-tra, or TWEHA WoodProtect or TWEHA Blacken where specified. Beyond surface preparation, it removes grease, dirt and contamination, uncured adhesive residues, and adhesive residue from stickers and labels, and is suitable for cleaning tools and workshop equipment as well as finishing and cleaning freshly applied adhesive beads.