Gør skruer og nitter overflødige, hvilket sikrer, at panelerne bevarer et rent og sømløst arkitektonisk udseende.
TWEHA GlassMate
High-performance elastic adhesive for architectural glass façades
TWEHA GlassMate er et homogent, meget elastisk, enkomponent hybridpolymer-klæbemiddel i høj kvalitet, der er specielt udviklet til holdbar konstruktionslimning af hærdet glas og andre godkendte glasfacadematerialer.
Systemet gør det muligt at skabe rene og visuelt uforstyrrede glasfacader uden synlige skruer, nitter, klemmer eller traditionelle rammer, der forstyrrer det arkitektoniske udtryk. TWEHA markedsfører GlassMate specifikt til hærdet glas og andre glastyper, der anvendes som vægbeklædningsmaterialer.
TWEHA’s testede og godkendte database omfatter også glasrelaterede underlag, såsom emaljeret glas, hvilket understreger vigtigheden af at vælge klæbesystemet i overensstemmelse med den nøjagtige glaskonstruktion og overfladebehandling.
The complete TWEHA Bonding System combines TWEHA GlassMate, TWEHA Cleaner+ and TWEHA Tape, supplemented where required with products such as TWEHA SyntheticPrimer or TWEHA Primer #1 or TWEHA Blacken. Surface finishes such as powder coatings must always be checked against the applicable TWEHA approval or tested before use. Always consult the Technical Data Sheets and TWEHA’s current approval database. Compatibility must always be verified for the specific glass type, coating and supporting structure.
Foliepakke
600 ml
(sort / grå)
Udviklet med fokus på ydeevne og effektivitet
Udviklet til pålidelig limning
TWEHA GlassMate combines high bond strength with permanent elasticity:
01
High-End Technology for Architectural Glass
A one-component hybrid-polymer solution specifically developed for architectural glass applications.
02
Elastic and Permanently Flexible
Accommodates differential thermal expansion between the glass and its supporting structure.
03
Excellent Adhesion and Strength
Provides high tensile and shear strength, with primerless application on approved substrates where specified.
04
Ren og usynlig fastgørelse
Eliminates visible screws, rivets and clamps for clean, uninterrupted façade detailing.
05
Durable Exterior Performance
Offers excellent resistance to exterior conditions and reliable long-term bonding performance.
TWEHA GlassMate is particularly suitable for:
TWEHA GlassMate is particularly suitable for tempered glass façade panels, enameled glass, and decorative architectural glass, as well as glass wall cladding and opaque glass façade elements. It performs equally well in ventilated glass façade constructions and for bonding glass panels to aluminum supporting structures — making it the ideal choice for applications requiring a clean façade without visible mechanical fixings.
Et komplet limningssystem
Alle TWEHA-produkter indgår i Tweha Bonding System. Se altid de tekniske datablade og listerne over godkendte underlag for at sikre korrekt anvendelse af systemet.
Tekniske spørgsmål
Få hurtige svar på almindelige tekniske spørgsmål om StoneMate.
GlassMate is intended for approved façade glass, particularly opaque enamelled toughened glass panels.
Yes. GlassMate is specifically developed as an elastic adhesive for bonded glass façade applications.
Not necessarily. Approved glass surfaces can generally be bonded after the prescribed cleaning procedure unless additional treatment is specifically required.
The bonding surface must be completely dry, clean, dust-free and grease-free and prepared according to the TWEHA application instructions.
The Tape provides initial fixation and maintains the required nominal adhesive thickness of approximately 3 mm.
Mere effektivt, mere økonomisk
Sammenlignet med traditionelle mekaniske fastgørelsessystemer kan TWEHA-limningssystemer reducere installationsomkostningerne med op til 40%.
Hurtigere montering, færre komponenter og ingen synlige fastgørelser giver både økonomiske og æstetiske fordele.
Er du klar til at bygge uden grænser?
Oplev, hvordan vores produkt muliggør renere, hurtigere og mere effektive facademonteringer.