Võimaldab loobuda kruvide ja neetide kasutamisest, tänu millele säilitavad paneelid puhtad ja ühtlased arhitektuurilised jooned.
TWEHA Cleaner+
Universal cleaner and degreaser for professional bonding applications
TWEHA Cleaner+ on läbipaistev, neutraalne universaalpuhastus- ja rasvatustamisvahend, mis on spetsiaalselt valitud pindade ettevalmistamiseks enne liimimist, tihendamist või viimistlemist.
Puhas, kuiv ja rasvavaba pind on usaldusväärse liimimise eelduseks. TWEHA Cleaner+ eemaldab tõhusalt rasva, mustuse ja kõvenemata liimijäägid ning aurustub täielikult, jättes maha õlikihti. Seetõttu on see TWEHA liimimissüsteemides kasutatavate alusmaterjalide ettevalmistamisel hädavajalik komponent.
TWEHA Cleaner+ sobib kasutamiseks mitmesugustel materjalidel, sealhulgas alumiiniumil, puidul, sünteetilistel kiududel ja tsementpõhistel aluspindadel. Erinevalt agressiivsete rasvatustitest ei avalda see TWEHA kasutusjuhendite kohasel kasutamisel märkimisväärset mõju fassaadipaneelide pinnale.
For adhesive bonding applications, the surface must be dry, clean and free from dust and grease. Apply TWEHA Cleaner+ to the bonding surface and wipe in one direction using a clean, lint-free cloth or paper tissue. Allow TWEHA Cleaner+ to evaporate completely for approximately 10 minutes before continuing with the next application step. The cleaned surface must be protected against renewed contamination.
Because substrates and surface finishes can vary, suitability should always be verified against the applicable TWEHA Technical Data Sheet, Instructions for Use and the current list of tested and approved substrates.
Aerosol
500 ml
(approx. 20 m²)
Kas
5 ltr
(approx. 200 m²)
Värv
Transparant
Loodud jõudluse ja tõhususe nimel
Loodud usaldusväärseks liimimiseks
TWEHA Cleaner+ combines effective cleaning with fast and convenient application:
01
Universal Transparent Cleaner
A neutral cleaner and degreaser for a wide range of façade and construction materials.
02
Fast and Effective Cleaning
Removes grease, contamination and uncured adhesive residues quickly and effectively.
03
Suitable for Façade Materials
Provides non-aggressive cleaning for façade panels, aluminium and other light metals.
04
Clean and Easy Application
Easy to apply, evaporates quickly and completely, and leaves no oily residue.
05
Complete Surface Preparation
Suitable for preparing substrates and supporting structures within TWEHA Bonding Systems.
TWEHA Cleaner+ is particularly suitable for:
Particularly suitable for cleaning and degreasing surfaces before adhesive bonding, including the preparation of façade panels before applying TWEHA adhesives, aluminum supporting profiles, ferrous and non-ferrous metals, and fiber cement and other approved façade materials. It is equally suited to preparation before applying TWEHA PreFix X-tra, or TWEHA WoodProtect or TWEHA Blacken where specified. Beyond surface preparation, it removes grease, dirt and contamination, uncured adhesive residues, and adhesive residue from stickers and labels, and is suitable for cleaning tools and workshop equipment as well as finishing and cleaning freshly applied adhesive beads.
Täielik liimimissüsteem
Kõik TWEHA tooted kuuluvad Tweha Bonding Systemi. Süsteemi õigeks kasutamiseks tutvuge alati tehniliste andmelehtede ja heakskiidetud alusmaterjalide nimekirjadega.
Tehnilised küsimused
Leia kiired vastused StoneMate’iga seotud tavapärastele tehnilistele küsimustele.
Cleaner+ removes grease, dirt and contamination that could reduce adhesion between the substrate and the TWEHA adhesive.
Apply sufficient Cleaner+ and wipe the bonding area in one direction using clean paper or a clean lint-free cloth.
Cleaner+ must evaporate completely; under normal application conditions allow approximately 10 minutes before bonding.
No. Pre-moistened wipes may dry out or redistribute contamination and are therefore not recommended for structural bonding preparation.
As a guideline, approximately 20 m² with 500 ml or 200 m² with 5 litres can be treated, depending on the substrate.
Tõhusam, ökonoomsem
Võrreldes traditsiooniliste mehaaniliste kinnitussüsteemidega võimaldavad TWEHA liimimissüsteemid vähendada paigalduskulusid kuni 40% võrra.
Kiirem paigaldamine, vähem komponente ja nähtamatud kinnitused pakuvad nii majanduslikke kui ka esteetilisi eeliseid.
Kas oled valmis piirideta ehitama?
Avastage, kuidas meie toode võimaldab fassaadide paigaldamist puhtamalt, kiiremini ja tõhusamalt.