Gør skruer og nitter overflødige, hvilket sikrer, at panelerne bevarer et rent og sømløst arkitektonisk udseende.
TWEHA Cleaner+
Universal cleaner and degreaser for professional bonding applications
TWEHA Cleaner+ er et gennemsigtigt, neutralt universalrengørings- og affedtningsmiddel, der er specielt udvalgt til forberedelse af overflader før limning, tætning eller efterbehandling.
Rene, tørre og fedtfri overflader er afgørende for en pålidelig limning. TWEHA Cleaner+ fjerner effektivt fedt, snavs og uhærdede limrester og fordamper fuldstændigt uden at efterlade en fedtet hinde. Det er derfor en uundværlig del af forberedelsen af underlag, der anvendes i TWEHA-limningssystemer.
TWEHA Cleaner+ kan anvendes på en lang række materialer, herunder aluminium, træ, syntetiske fibre og cementbaserede underlag. I modsætning til aggressive affedtningsmidler har det ingen mærkbar indvirkning på overfladen af facadepaneler, når det anvendes i overensstemmelse med TWEHA’s anvendelsesvejledning.
For adhesive bonding applications, the surface must be dry, clean and free from dust and grease. Apply TWEHA Cleaner+ to the bonding surface and wipe in one direction using a clean, lint-free cloth or paper tissue. Allow TWEHA Cleaner+ to evaporate completely for approximately 10 minutes before continuing with the next application step. The cleaned surface must be protected against renewed contamination.
Because substrates and surface finishes can vary, suitability should always be verified against the applicable TWEHA Technical Data Sheet, Instructions for Use and the current list of tested and approved substrates.
Aerosol
500 ml
(approx. 20 m²)
Kan
5 ltr
(approx. 200 m²)
Farve
Transparant
Udviklet med fokus på ydeevne og effektivitet
Udviklet til pålidelig limning
TWEHA Cleaner+ combines effective cleaning with fast and convenient application:
01
Universal Transparent Cleaner
A neutral cleaner and degreaser for a wide range of façade and construction materials.
02
Fast and Effective Cleaning
Removes grease, contamination and uncured adhesive residues quickly and effectively.
03
Suitable for Façade Materials
Provides non-aggressive cleaning for façade panels, aluminium and other light metals.
04
Clean and Easy Application
Easy to apply, evaporates quickly and completely, and leaves no oily residue.
05
Complete Surface Preparation
Suitable for preparing substrates and supporting structures within TWEHA Bonding Systems.
TWEHA Cleaner+ is particularly suitable for:
Particularly suitable for cleaning and degreasing surfaces before adhesive bonding, including the preparation of façade panels before applying TWEHA adhesives, aluminum supporting profiles, ferrous and non-ferrous metals, and fiber cement and other approved façade materials. It is equally suited to preparation before applying TWEHA PreFix X-tra, or TWEHA WoodProtect or TWEHA Blacken where specified. Beyond surface preparation, it removes grease, dirt and contamination, uncured adhesive residues, and adhesive residue from stickers and labels, and is suitable for cleaning tools and workshop equipment as well as finishing and cleaning freshly applied adhesive beads.
Et komplet limningssystem
Alle TWEHA-produkter indgår i Tweha Bonding System. Se altid de tekniske datablade og listerne over godkendte underlag for at sikre korrekt anvendelse af systemet.
Tekniske spørgsmål
Få hurtige svar på almindelige tekniske spørgsmål om StoneMate.
Cleaner+ removes grease, dirt and contamination that could reduce adhesion between the substrate and the TWEHA adhesive.
Apply sufficient Cleaner+ and wipe the bonding area in one direction using clean paper or a clean lint-free cloth.
Cleaner+ must evaporate completely; under normal application conditions allow approximately 10 minutes before bonding.
No. Pre-moistened wipes may dry out or redistribute contamination and are therefore not recommended for structural bonding preparation.
As a guideline, approximately 20 m² with 500 ml or 200 m² with 5 litres can be treated, depending on the substrate.
Mere effektivt, mere økonomisk
Sammenlignet med traditionelle mekaniske fastgørelsessystemer kan TWEHA-limningssystemer reducere installationsomkostningerne med op til 40%.
Hurtigere montering, færre komponenter og ingen synlige fastgørelser giver både økonomiske og æstetiske fordele.
Er du klar til at bygge uden grænser?
Oplev, hvordan vores produkt muliggør renere, hurtigere og mere effektive facademonteringer.