Võimaldab loobuda kruvide ja neetide kasutamisest, tänu millele säilitavad paneelid puhtad ja ühtlased arhitektuurilised jooned.
TWEHA WoodProtect
Protective black wood treatment for timber façade supporting structures
TWEHA WoodProtect on must puidukaitseaine, mis on spetsiaalselt välja töötatud ventileeritavates ja vihmakaitsefassaadisüsteemides kasutatavate puidust kandekonstruktsioonide jaoks.
TWEHA WoodProtect tagab püsiva kaitse niiskuse eest ja aitab kaitsta puitu kriitilistes kohtades, kus see puutub kokku betooni, terase või müüritisega. Tänu suletud rakkudega pinnastruktuurile aitab see kaitsta puitu puidumädaniku eest, luues samal ajal sobiva kinnituspinna TWEHA lindi ja TWEHA liimide jaoks.
Lisaks kaitsvale funktsioonile pakub must värv olulist esteetilist eelist. Avatud vuugidega fassaadikonstruktsioonides loob TWEHA WoodProtect vuugide taha tumeda tausta, mis takistab puidust kandekonstruktsiooni silma jäämist fassaadipaneelide vahel.
TWEHA WoodProtect is not an adhesion primer. Its primary functions are to protect and prepare the timber supporting structure and to create a controlled surface for the subsequent TWEHA Bonding System.
Before application, the timber supporting structure must be dry, clean and free from dust and grease. The wood moisture content must be below 18%. TWEHA WoodProtect should be thoroughly mixed before use and applied in one thin, continuous and fully covering layer using a clean fine-structured roller. Multiple layers should not be applied.
TWEHA WoodProtect must not be applied to painted wood, plywood, aluminum or other metals. After application, façade bonding can normally commence after approximately 2 hours. Drying time is influenced by ambient temperature; ideal processing conditions are approximately 18–20 °C, and application below approximately 5 °C is not recommended.
After TWEHA WoodProtect has dried completely, TWEHA Tape and the appropriate TWEHA adhesive can be applied in accordance with the applicable TWEHA Instructions for Use.
Always refer to the applicable TWEHA Technical Data Sheet and Instructions for Use for the complete application
Kas
1 liiter
(approx. 300 linear m)
Värv
Black
Loodud jõudluse ja tõhususe nimel
Loodud usaldusväärseks liimimiseks
TWEHA WoodProtect combines timber protection, surface preparation and visual finishing in one product:
01
Developed for Timber Substructures
Specifically developed for timber façade supporting structures—particularly untreated pinewood—within TWEHA Bonding Systems.
02
Black Protective Finish
Creates a dark background behind open façade joints for clean and consistent detailing.
03
Protection Against Moisture and Wood Rot
Forms a closed protective surface that withstands demanding interfaces with other construction materials.
04
Suitable Bonding Surface
Provides an appropriate substrate for both TWEHA Tape and TWEHA adhesives.
05
Easy and Controlled Application
Applied with a fine-structured roller in one thin, full-cover layer and can be applied in advance under controlled conditions.
TWEHA WoodProtect is particularly suitable for:
TWEHA WoodProtect is particularly suitable for untreated pinewood timber supporting structures and timber battens in ventilated façade constructions, as well as rainscreen façade supporting structures more broadly. It protects timber against moisture penetration, including where timber is installed in areas adjoining concrete, steel or masonry, and creates a suitable surface for TWEHA Tape and TWEHA adhesives — or a black background behind open façade joints. It is used for protecting timber supporting structures before installation in exterior bonded façade applications, as well as for preserved timber where additional treatment of the bonding surface is required.
For exterior applications, untreated pinewood must be protected all around with TWEHA WoodProtect before installation. Preserved timber only requires treatment of the surface on which the TWEHA bonding system will be applied.
Täielik liimimissüsteem
Kõik TWEHA tooted kuuluvad Tweha Bonding Systemi. Süsteemi õigeks kasutamiseks tutvuge alati tehniliste andmelehtede ja heakskiidetud alusmaterjalide nimekirjadega.
Tehnilised küsimused
Leia kiired vastused StoneMate’iga seotud tavapärastele tehnilistele küsimustele.
WoodProtect protects and prepares suitable timber substructures for use with TWEHA bonded ventilated façade systems.
WoodProtect improves protection against moisture and creates a suitable bonding surface for the TWEHA Tape and adhesive system.
The timber moisture content should be below 18% before WoodProtect and the bonding system are applied.
No. Structural-quality timber with a sound, properly planed bonding surface is required and the actual timber should be assessed for adhesion.
The surface should be free from knots, cracks, resin pockets, grease, dust, contamination and planer damage.
Tõhusam, ökonoomsem
Võrreldes traditsiooniliste mehaaniliste kinnitussüsteemidega võimaldavad TWEHA liimimissüsteemid vähendada paigalduskulusid kuni 40% võrra.
Kiirem paigaldamine, vähem komponente ja nähtamatud kinnitused pakuvad nii majanduslikke kui ka esteetilisi eeliseid.
Kas oled valmis piirideta ehitama?
Avastage, kuidas meie toode võimaldab fassaadide paigaldamist puhtamalt, kiiremini ja tõhusamalt.