Võimaldab loobuda kruvide ja neetide kasutamisest, tänu millele säilitavad paneelid puhtad ja ühtlased arhitektuurilised jooned.
TWEHA-lint
Double-sided foam tape for initial fixation and controlled adhesive bead thickness
TWEHA Tape on väga paindlik, kahepoolne isekleepuv vahtlint, mis on spetsiaalselt välja töötatud kasutamiseks TWEHA liimimissüsteemide lahutamatu osana vihmakaitse- ja ventileeritavate fassaadikattematerjalide puhul.
Standardse paksusega 3 mm ja laiusega 12 mm tagab TWEHA-lint fassaadipaneeli esialgse kinnituse paigaldamise ajal ning toimib samal ajal vahekihina, et tagada liimijoone minimaalne nõutav paksus 3 mm.
Tänu suurele paindlikkusele suudab lint kohaneda väikeste pinnakõikumistega, tagades samal ajal paneeli usaldusväärse paigutuse paigaldamise ajal. TWEHA-lint takistab ka niiskuse imendumist ja sissepääsu ning on mõeldud kasutamiseks koos sobiva TWEHA liimi ja pinnatöötlusvahenditega.
TWEHA Tape must be applied to a dry, clean, dust-free and grease-free substrate. Where TWEHA Cleaner+ or TWEHA WoodProtect is required, these products must be allowed to dry completely before the tape is applied.
Within the TWEHA Bonding System, the adhesive bead is applied approximately 10 mm alongside the TWEHA Tape in an uninterrupted V-shaped bead. After removal of the protective liner, the façade panel is positioned and pressed firmly until full contact with the tape is achieved.
Always refer to the applicable TWEHA Technical Data Sheet and Instructions for Use for the complete application procedure.
Roll
length: 25 m
(approx. 8 m²)
Dimension
12 x 3 mm
(width x thickness)
Värv
dark grey
Loodud jõudluse ja tõhususe nimel
Loodud usaldusväärseks liimimiseks
TWEHA Tape provides several important functions within the TWEHA Bonding System:
01
Double-Sided Foam Tape
Specifically designed for use in TWEHA Bonding Systems on aluminium and prepared wooden supporting structures.
02
Immediate Panel Fixation
Provides immediate initial fixation and allows accurate positioning of façade panels.
03
Controlled Adhesive Joint
Maintains the required minimum adhesive bead thickness of 3 mm for consistent and controlled joint geometry.
04
Highly Flexible
Adapts effectively to minor irregularities in the supporting surface.
05
Fast and Protective Application
Easy and quick to apply while helping to prevent moisture absorption and ingress.
TWEHA Tape is particularly suitable for:
TWEHA Tape is particularly suitable for the initial fixation of façade panels during adhesive installation, and for use within TWEHA bonded rainscreen façade systems and ventilated façade constructions. It maintains the required 3 mm adhesive bead thickness while positioning façade panels during installation, and compensates for minor irregularities in the supporting surface. It can be applied on aluminum supporting profiles as well as appropriately prepared wooden supporting structures, and is used in combination with TWEHA PanelMate, StoneMate, GlassMate and MetalMate — making it suited to professional façade applications where a controlled and consistent adhesive joint is required.
Täielik liimimissüsteem
Kõik TWEHA tooted kuuluvad Tweha Bonding Systemi. Süsteemi õigeks kasutamiseks tutvuge alati tehniliste andmelehtede ja heakskiidetud alusmaterjalide nimekirjadega.
Tehnilised küsimused
Leia kiired vastused StoneMate’iga seotud tavapärastele tehnilistele küsimustele.
TWEHA Tape provides initial panel fixation and controls the required adhesive layer thickness during installation.
Standard TWEHA Tape is 3 mm thick, maintaining the nominal 3 mm adhesive thickness after panel positioning.
The standard size is 3 mm × 12 mm, supplied on 25 metre rolls; other sizes may be available on request.
No. TWEHA Tape is non-structural; permanent façade loads are transferred through the fully cured adhesive.
Remove the liner only after applying the adhesive bead and immediately before positioning the façade panel.
Tõhusam, ökonoomsem
Võrreldes traditsiooniliste mehaaniliste kinnitussüsteemidega võimaldavad TWEHA liimimissüsteemid vähendada paigalduskulusid kuni 40% võrra.
Kiirem paigaldamine, vähem komponente ja nähtamatud kinnitused pakuvad nii majanduslikke kui ka esteetilisi eeliseid.
Kas oled valmis piirideta ehitama?
Avastage, kuidas meie toode võimaldab fassaadide paigaldamist puhtamalt, kiiremini ja tõhusamalt.