TWEHA Blacken

Fast-drying black coating for aluminum façade profiles and bonded cladding systems

TWEHA Blacken is a specially developed black coating for aluminum supporting profiles used in ventilated and rainscreen façade constructions.

With open-jointed façade systems, the natural bright or shiny appearance of mill-finished aluminum profiles can remain visible between the cladding panels and interfere with the desired architectural appearance. Black anodized aluminum provides a solution but can add considerable cost. TWEHA Blacken offers a practical alternative by creating a uniform black surface on the visible parts of the aluminum supporting structure.

Unlike conventional decorative paint, TWEHA Blacken has been developed specifically for this application. The coating must not only adhere durably to aluminum but may also form part of the bonding surface onto which the TWEHA adhesive system is subsequently applied. This makes adhesion performance an essential characteristic of the product.

Before applying TWEHA Blacken, the aluminum must be dry, clean and free from dust and grease. The surface must first be properly cleaned and degreased using TWEHA Cleaner+.
TWEHA Blacken is applied to the visible area of the aluminum profile — normally over the width of the façade joint or wider where required. After application, allow the coating to dry for a minimum of 30 minutes. The TWEHA adhesive system can subsequently be applied partly or completely over the treated black surface.

Always refer to the applicable TWEHA Technical Data Sheet and Instructions for Use for the complete surface preparation and application procedure.

تنزيل ورقة البيانات الفنية

الاتصال

Tubes

10x15 ml

Color

Black

with application sponge

مصمم لتحقيق الأداء والكفاءة

لا حاجة إلى تثبيت ميكانيكي

يلغي الحاجة إلى استخدام البراغي أو المسامير، مما يتيح للألواح الحفاظ على مظهر معماري أنيق وسلس.

حرية التصميم

يمكن تصميم الألواح بحيث تكون أرق وأخف وزنًا، دون الحاجة إلى تضمين أنظمة تثبيت ميكانيكية.

أداء عالي القوة

يوفر قوة التصاق وقوة شد وقوة قص ممتازة، مما يضمن موثوقية هيكلية على المدى الطويل.

التطبيق بدون مادة أولية

لا حاجة إلى استخدام طبقات أولية لاصقة قوية على معظم الأسطح، مما يقلل من وقت التركيب وتكاليفه.

لا حاجة إلى تثبيت ميكانيكي

يلغي الحاجة إلى استخدام البراغي أو المسامير، مما يتيح للألواح الحفاظ على مظهر معماري أنيق وسلس.

حرية التصميم

يمكن تصميم الألواح بحيث تكون أرق وأخف وزنًا، دون الحاجة إلى تضمين أنظمة تثبيت ميكانيكية.

أداء عالي القوة

يوفر قوة التصاق وقوة شد وقوة قص ممتازة، مما يضمن موثوقية هيكلية على المدى الطويل.

التطبيق بدون مادة أولية

لا حاجة إلى استخدام طبقات أولية لاصقة قوية على معظم الأسطح، مما يقلل من وقت التركيب وتكاليفه.

مصممة لتوفير ربط موثوق به

TWEHA Blacken combines the required visual finish with compatibility with TWEHA Bonding Systems:

01

Developed for Aluminium Substructures

Specifically developed for aluminium façade supporting structures as part of the TWEHA façade bonding concept.

02

Uniform Black Appearance

Conceals the shiny appearance of mill-finished aluminium behind open façade joints.

03

Suitable Bonding Surface

Provides excellent adhesion to properly prepared aluminium and creates a suitable surface for TWEHA adhesive systems. It may form part of the adhesive bonding area.

04

Fast and Controlled Application

Dries quickly and can be applied easily and precisely only where required, such as across the visible joint width.

05

Clean Façade Detailing

Contributes to an uninterrupted appearance and removes the need for black anodised aluminium purely for visual purposes.

TWEHA Blacken is particularly suitable for:

TWEHA Blacken is particularly suitable for blackening mill-finished aluminum façade profiles, and for visually concealing aluminum supporting structures behind open façade joints or creating a uniform dark background between façade panels. It is designed for ventilated and rainscreen façade constructions, particularly on vertical aluminum supporting profiles, and can be applied in areas where TWEHA adhesive and/or TWEHA Tape is subsequently applied over the blackened surface. It offers a practical alternative for projects where black anodized aluminum is not required or economically desirable, and is suited to use in combination with TWEHA bonded façade systems as well as the renovation or modification of visible aluminum supporting structures.