Elimină necesitatea utilizării șuruburilor sau a niturilor, permițând panourilor să păstreze un aspect arhitectural curat și fără îmbinări vizibile.
TWEHA SyntheticPrimer
Special surface pre-treatment for synthetic supporting structures and polymer-based surfaces
TWEHA SyntheticPrimer este un produs de pretratare a suprafețelor, special conceput pentru structuri de susținere sintetice și suprafețe de susținere cu finisaj sintetic sau pe bază de polimeri, în cazul cărora lipirea directă poate fi limitată de o energie superficială relativ scăzută.
Multe finisaje de suprafață pe bază de materiale plastice și polimeri prezintă caracteristici care îngreunează umectarea și aderența fiabile. TWEHA SyntheticPrimer modifică suprafața de lipire și creează o interfață netedă, uniformă și stabilă, pe care se poate aplica adezivul TWEHA.
TWEHA SyntheticPrimer este destinat în special structurilor de susținere fabricate din materiale sintetice sau prevăzute cu o suprafață pe bază de plastic. Anumite vopsele pulverulente sunt, de asemenea, considerate suprafețe pe bază de polimeri din punct de vedere al aderenței și pot necesita, prin urmare, acest tip de pretratare. Datorită variației mari a compozițiilor materialelor plastice și ale vopselelor, aderența durabilă trebuie verificată întotdeauna prin teste înainte de utilizare.
TWEHA SyntheticPrimer should be regarded as a surface pre-treatment rather than a conventional adhesion primer. Its purpose is to modify and homogenize the synthetic bonding surface so that a controlled interface for the TWEHA adhesive is created.
Before application, the surface must be dry, clean and free from dust, grease and other contamination. Thoroughly clean and degrease the bonding area with TWEHA Cleaner+ and allow the cleaner to evaporate completely.
Shake TWEHA SyntheticPrimer thoroughly before use and apply one thin, continuous layer using a suitable brush or fine-structure roller. Process only the quantity required and keep the container closed as much as possible during use.
Allow TWEHA SyntheticPrimer to dry completely. Bonding with the appropriate TWEHA adhesive can commence after a minimum of approximately 30 minutes, subject to the applicable environmental conditions and Instructions for Use.
Because plastics, composites and polymer coatings can differ significantly in chemical composition and surface energy, the use of TWEHA SyntheticPrimer does not in itself guarantee durable adhesion. The complete combination of supporting material, surface finish, SyntheticPrimer and TWEHA adhesive must always be assessed by means of an appropriate adhesion and durability test before application. TWEHA specifically requires testing for critical low-surface-energy and powder-coated surfaces.
Always refer to the applicable TWEHA Technical Data Sheet, Instructions for Use and the current list of Tested & Approved
Poate
1 litru
Conceput pentru performanță și eficiență
Conceput pentru o lipire fiabilă
TWEHA SyntheticPrimer creates improved bonding conditions on difficult synthetic surfaces:
01
Developed for Synthetic Surfaces
Specifically developed for synthetic and polymer-based surfaces within TWEHA Bonding Systems.
02
Suitable for Selected Substrates
Particularly suitable for synthetic supporting structures, selected low-surface-energy substrates and tested powder-coated surfaces.
03
Improved Bonding Interface
Creates a smooth, consistent surface and promotes better wetting by the TWEHA adhesive.
04
Stable Intermediate Layer
Improves conditions for adhesive application where direct primerless bonding cannot be demonstrated.
05
Fast and Economical Application
Easy to apply, fast-drying and requires only one thin, continuous layer.
TWEHA SyntheticPrimer is particularly suitable for:
TWEHA SyntheticPrimer is particularly suitable for synthetic supporting structures, polymer-based supporting profiles, and plastic or plastic-related bonding surfaces, including selected composite supporting materials with a synthetic bonding surface and selected powder-coated supporting structures. It is designed for low surface energy substrates where direct adhesive bonding is insufficient, and is used for the preparation of difficult synthetic surfaces before application of a TWEHA adhesive. Suitable for ventilated and rainscreen façade constructions with synthetic supporting components, it is the product of choice for professional façade applications where a controlled adhesive interface is required.
TWEHA SyntheticPrimer is intended for the supporting structure or bonding substrate. It is not intended as a general primer for the rear surface of façade panels and must therefore not be applied to the back of the cladding panel unless specifically tested and approved by TWEHA for that application.
Un sistem complet de lipire
Toate produsele TWEHA fac parte din sistemul de lipire Tweha. Pentru aplicarea corectă a sistemului, consultați întotdeauna fișele tehnice și listele de substraturi aprobate.
Întrebări tehnice
Găsiți răspunsuri rapide la întrebările tehnice frecvente despre StoneMate.
SyntheticPrimer is a surface treatment for selected low-surface-energy synthetic or coated materials where additional adhesion improvement is required.
No. Powder coatings vary greatly in composition and adhesion, so applying SyntheticPrimer alone does not constitute technical approval.
Not as a standard TWEHA solution. Where bonding to the aluminium flange is required, the powder coating must be completely removed unless the specific system has been tested and approved.
No. The surface must still be dry, clean and grease-free before SyntheticPrimer is applied.
Surface energy, coating chemistry and coating adhesion can differ significantly, so durable adhesion must be verified on the actual material.
Mai eficient, mai economic
În comparație cu sistemele tradiționale de fixare mecanică, sistemele de lipire TWEHA pot reduce costurile de instalare cu până la 40%.
Instalarea mai rapidă, numărul redus de componente și lipsa elementelor de fixare vizibile oferă avantaje atât din punct de vedere economic, cât și estetic.
Ești pregătit să construiești fără limite?
Descoperiți cum produsul nostru permite realizarea unor montări de fațade mai curate, mai rapide și mai eficiente.